Watchguard Firebox X1000, Руководство пользователя

Страница: 230 / 314

Chapter 12: Setting Up Logging and Notification
208 WatchGuard Firebox System
Windows service. The default method is for the WSEP
application to run as a Windows service.
By default, the WSEP application is installed to run as a
Windows service, starting automatically every time the
host computer restarts.
1
To start the WatchGuard Security Event Processor
service:
- In Windows NT, go to Start => Settings => Control
Panel => Services.
- In Windows 2000, go to Start => Settings =>
Control Panel => Administrative Tools =>
Services .
- In Windows XP, go to Start => Control Panel =>
Administrative Tools => Services .
2
Double-click or right-click WG Security Event
Processor . Click Start .
- Or, right-click on the WSEP icon in the system
tray and select Start .
- You can also restart your computer. The service
starts automatically every time the host reboots.
In addition, if the WSEP application is running as a service
and you are using pop-up notifications, make sure the ser-
vice can interact with the Desktop.
1 Verify that the WatchGuard Security Event Processor
service is enabled to interact with the desktop:
- In Windows NT, go to Start => Settings =>
Control Panel => Services.
- In Windows 2000, go to Start => Settings =>
Control Panel => Administrative Tools =>
Services .
- In Windows XP, go to Start => Control Panel =>
Administrative Tools => Services .
2
Double-click WG Security Event Processor . Click the
Log On tab.
3
Verify that the Allow service to interact with desktop
checkbox is selected.