4
WatchGuard Firebox T35 & T55
Hardware Specifications
Attn
The Attn indicator is yellow when you start the device with the Reset button pressed. For more
information, see “Restore Factory Default Settings” on page 6
Power (
)
The power indicator is green when the device is on.
Rear View
Rear panel of the Firebox T55:
Network interfaces
The Ethernet interfaces have standard RJ45 connectors and support link speeds of 1, 100, or 1000
Mbps.
The Firebox T35 and T55 have five network interfaces. They are labeled 0/WAN, 1/LAN, 2, 3, 4-PoE. The
highest numbered interface is a PoE (Power over Ethernet) interface, compliant with the IEEE 802.3at
standard.
USB interfaces
The Firebox T35 and T55 have two USB interfaces. Connect a USB storage device to use for USB
backup and restore, or to store a support snapshot. For more information, see the current
Fireware
Help
.
Serial port (Console)
An RJ45 connector for the serial interface. An RJ45 serial cable is not included with the device.
Power switch
Controls the power supplied to the device. Move the switch to position
1
to power on the device, or
position
0
to power it off.
Power input
An AC power adapter is included with your device. Connect the AC adapter to the device and to a
power source. The power supply tip is plus (+) polarity. Use only the supplied AC power adapter.
Reset button
To reset the device, use the procedure in “Restore Factory Default Settings” on page 6.
