7
Recording mode
Enter the Recording Mode screen from “Main Menu”>“Record”, as shown below:
CHANNEL:
used to select if the video recording function is enabled for the corresponding recording
channel.
RESOLUTION:
available in the 3 levels of D1
（
704*576
）
, HD1
（
704*288
）
and CIF
（
352*288
）
(
Note:
This
option is available for 4-channel DVR only, and the resolution of 8-channel DVR is CIF by default.)
QUALITY:
3 levels available are high, normal and low, which correspond to the 3 data stream standards
of high, normal and low bit rates.
REC.MODE:
there are two available modes recording. These are “When powered up” and “By Time”.
When powered up
: The DVR will record when powered on.
By Time
: The DVR will record as per its schedule. When “timing recording” is selected, the “Record
Time Configuration” button will appear on the right. Move the cursor here and press “Enter” to enter
the Record Time Configuration screen, as shown below:
Channel:
You may choose either “All” or a single channel.
Time configuration:
First select from the 3 modes of alarm recording, general recording and no
recording for your desired recording mode for a certain lattice, and configure specific recording time
lattices (each lattice represents 1hr). Each lattice can be configured into different recording modes
by marking them into different colors, such as red, green and background color, which represent
alarm recording, general recording or no recording within each hour respectively.
FILE LENGTH:
Left-click or press “Enter” to select the File length, with the 4 options of 15min, 30min,
45min and 60min.
