System Config > Detection
Select the desired channel, and
press “
E
E
d
d
i
i
t
t” to enter the motion
detection sensitivity and area
setting box.
Motion
Detection
Sensitivity
Motion Detection Sensitivity
:
Set the detection sensitivity in 4
different adjustable factors.
LS:
LS:
The sensitivity of comparing
two different images. The smaller
the value, the higher sensitivity for
the motion detection.
SS:
SS:
The sensitivity towards the
size of the triggered object on the
screen (the number of motion
detection grids). The smaller the
value, the higher sensitivity for the
motion detection.
TS:
TS:
The sensitivity towards how
long the object stays in the
detection area to get triggered.
The smaller the value, the higher
sensitivity for the motion detection.
RE:
RE:
The value of RE is a reference
for the detection. The bigger the
value, the higher sensitivity for the
motion detection.
Alarm:
Alarm:
Select LOW / HIGH for the alarm
polarity.
Motion
Detection
Area
Motion Detection Area
:
By clicking the area with your
mouse
, one can choose the
motion area to be detected.
The
under
detected
area
is
transparent
while
the
undetected
area
is
in
pink
color.
.
*Click “
Select All
” to activate the
detection area as the full area.
*Click “
Clear All
” to clean the
previously selected detection area.
After setting, press “OK” and then
press “APPLY” to confirm.
The
under detected area is transparent
undetected area is in
while the
pink color
- 32 -
