ADDRESS:
505 Fifth Avenue South, Suite 500, Seattle, WA 98104
U.S. SALES:
1.800.734.9905 •
INTERNATIONAL SALES:
+1.206.613.0895
WEB:
©2023 WatchGuard Technologies, Inc. All rights reserved. WatchGuard, the WatchGuard Logo, Fireware,
and LiveSecurity are registered trademarks of WatchGuard Technologies, Inc. in the United States and/or
other countries. All other trademarks and tradenames are the property of their respective owners.
P.N. 352-4332-001 Rev
C
111623
1.877.232.3531
(U.S. and Canada)
WATCHGUARD TECHNICAL SUPPORT
+1.206.613.0456
(all other countries)
Declaration of Conformity
WatchGuard Technologies, Inc.
505 Fifth Ave. S., Suite 500
Seattle, WA 98104-3892 USA
WatchGuard Technologies Inc. hereby declares that the product(s) listed below conform to the European Union directives and
standards identified in this declaration.
Product (s):
802.11a/b/g/n/ac/ax Access Point, AP332CR
EU Directive(s):
Low Voltage (2014/35/EU)
Electromagnetic Compatibility (2014/30/EU)
Energy-related Products (2009/125/EC)
RoHS (2011/65/EU and 2015/863/EU RoHS)
WEEE Directive 2012/19/EU
The Radio Equipment Directive (2014/53/EU)
Common Standard(s):
EN 62368-1:2014+A11:2017
Safety for ITE
EN 55032:2015+A11:2020
EN 55035:2017/A11:2020
EN 61000-3-2:2019
Harmonics
EN 61000-3-3:2013+A1:2019
Flicker
Wireless Standard(s):
EN 62311:2008
EN 301 489-1 v2.2.3 (2019-11)
EMC and Radio Spectrum Matters
EN 301 489-17 v3.2.4 (2020-09)
EMC and Radio Spectrum Matters
EN 300 328 v2.2.2 (2019-07)
Radio Spectrum Matters
EN 301 893 v2.1.1 (2017-05)
Broadband Radio Access Networks
This device complies with Directive 2014/53/EU issued by the Commission of the European Community.
Manufacturer / Hersteller:
WatchGuard Technologies
505 5th Ave S. Suite 500, Seattle, WA 98104 USA
Radio Equipment / Funkanlage:
802.11a/b/g/n/ac/ax Access Point
Type Designation / Typenbezeichnung:
AP332CR
Specifications / Technische Daten:
802.11a/b/g/n/ac/ax (2.4GHz & 5GHz)
Intended Purpose / Verwendungszweck:
Cloud managed wireless outdoor access point
Equipment Class / Betriebsmittel der Klasse:
Class II
Operating temperature / Betriebstemperatur:
-20° C to 60° C
The above device complies with the essential requirements and other relevant provisions to Directive 2014/53/EU when used for its
intended purpose. This equipment may be operated in the USA, Canada, & Europe Union.
Die oben genannten Gerät entspricht den grundlegenden Anforderungen und anderen relevanten Bestimmungen der Richtlinie
2014/53/EU, wenn für den vorgesehenen Zweck verwendet werden. Dieses Gerät ist für die Verwendung in den USA, Kanada, and
Europäische Union.
Signature
Full Name:
Laurence Huang
Position:
Manufacturing Program Manager
Date and Place of Issue: 14 June 2022, Seattle, WA, USA
A full list of safety approvals, global compliance standards, and certifications can be found in the Hardware Guide for this device located on the
WatchGuard website:
https://www.watchguard.com/wgrd-help/documentation/hardware-guides
To protect your outdoor AP from electrical events, we recommend you ground the AP with the included ground
wire based on your local regulations.
Um Ihren AP im Außenbereich vor elektrischen Problemen zu schützen, empfehlen wir, den AP gemäß den lokalen
Vorschriften mit dem bereitgestellten Erdungskabel zu erden.
Para proteger su PA exterior de eventos eléctricos, recomendamos que lo conecte a tierra con el cable de conexión a
tierra incluido, según sus regulaciones locales.
A fim de proteger seu AP para ambientes externos contra eventos elétricos, recomendamos aterrá-lo com o fio de
aterramento incluído conforme a regulamentação local.
Per proteggere l’AP da fenomeni elettrici, si raccomanda di collegarlo a terra con l’apposito cavo incluso nella
confezione ai sensi delle normative locali.
Pour protéger votre point d’accès extérieur des événements électriques, nous vous recommandons de le raccorder à
la terre à l’aide du câble de terre fourni, conformément aux réglementations locales.
為了保護室外 AP 不受電氣事件影響，建議您根據當地法規使用內含的接地線對 AP 進行接地。
야외 AP를 전기 사고 발생 위험으로부터 보호하려면 지역별 규정에 따라 AP를 동봉된 접지 와이어로
접지하는 것이 좋습니다.
屋外用 AP を落雷や感電などの事故から守るために、地元の規制に従って、付属の接地線を使用して AP の
接地を行うことをお勧めします。
为了保护您的户外 AP 免受电气活动的影响，我们建议您根据当地的法规，使用随附的地线将 AP 接地。
CONFIGURE
4
Configurer Konfigurieren Configurar
構成する
CONFIGURE
4
Wi-Fi in WatchGuard Cloud
Configurer Konfigurieren Configurar
構成する
NOTICES:
All WatchGuard products are designed and tested to meet strict safety requirements. These requirements
include product safety approvals and other global compliance standards. Please read these instructions
carefully before operating the product, and refer to them as needed to ensure the continued safe
operation of your product. Additional information about the hardware, including additional languages, a
full list of safety approvals, global compliance standards, and certifications can be found in the Hardware
Guide for this device located on the WatchGuard website:
https://www.watchguard.com/wgrd-help/documentation/hardware-guides
•
Do not place objects on the power cord.
•
Do not obstruct the ventilation openings. These openings prevent overheating of the machine.
•
Never push objects of any kind into slots or openings on this equipment. Making a contact with a
voltage point or shorting out a part may result in fire or electrical shock.
•
When removing or installing an appliance, follow the general installation safety instructions.
If protective earthing is used as a safeguard, the instructions shall require connection of the equipment
protective earthing conductor to the installation protective earthing conductor (for example, by means of
a power cord connected to a socket-outlet with earthing connection). To meet safety and electromagnetic
interference (EMI) requirements, you must make sure the power source is connected to earth ground
before you connect power to the device.
Connect the PoE interface only to PoE networks, without routing to the outside plant.
This product is intended to be supplied by a Listed Power Adapter or DC power source marked “L.P.S.” (or
Limited Power Source or PS2) rated 54V DC, 1A minimum, maximum ambient temperature (Tma)=40°C,
or supplied by a Listed PoE Adapter marked “L.P.S.” (or Limited Power Source or PS2) rated 54VDC, 0.6A
minimum, maximum ambient temperature (Tma)=40°C. For more information regarding approved power
sources, see the Hardware Guide for this device.
Avis Hinweiss Avisos
お知らせ
Radio Frequencies
Max Power
2412 - 2472 MHz
19.89 dBm
5500 - 5700 MHz
29.83 dBm
Hereby, WatchGuard Technologies Inc. declares that the radio equipment type AP
332
CR Wireless
Access Point is in compliance with Directive 2014/53/EU. The full text of the EU declaration of
conformity is available at:
https://www.watchguard.com/wgrd-help/documentation/hardware-guides
This device has software that cannot affect compliance with the Radio Equipment Directive (RED)
2014/53/EU, even if the software is changed or replaced.
This device is restricted to indoor use when operating in the 5150 to 5350 MHz frequency range in the
indicated countries.
