Watchguard 4RE, Руководство пользователя

Страница: 24 / 118

Using In-Car 4RE DVR
2. Touch the button for the camera whose state you want to change.
3. When you want to reactivate the camera stream, press Cameras on the control panel, then
touch the camera button for the deactivated stream.
Important! You can only deactivate a camera stream on a recording if you have
more than one camera. The 4RE DVR requires that one camera always be on.
Note: The permission to let you turn off a camera (deactivate a stream) must be
configured in your Evidence Library.
For more information, see Cameras control on page 78
Creating recorded events
A recorded event is a unique, protected segment of recorded:
l
Video
l
Audio
l
Subtitles
Recorded events are typically started by an auto-start trigger, such as emergency lights or the
siren. But, you can start an event manually by pressing the
Record control on the Display
Control Panel.
Important! If the 4RE DVR is powered on, it is continuously recording to the
hard drive. Pressing the Stop control does not stop this continuous recording—it
only marks the end of the recorded event.
To manually start and stop a recorded event:
1. Press Record on the control panel.
The Record control turns red when it is recording. It stays red until the Stop
control is pressed.
24 4RE In-Car Video User Guide 4.0.6
WGD00089 Revision D