Watchguard 4RE, Руководство пользователя

Страница: 78 / 118

Understanding the 4RE System
Note: Dark Mode is not the same as Covert mode (page 27) .
Dark screen with movement
If your configuration allows, the 4RE DVR goes dark when the vehicle starts to move. See your
Evidence Library software documentation.
Cameras control
You can review (or change, if configured) the state of the cameras connected to the
4RE system using the
Cameras control.
The LED numbers above the Cameras control show which camera connections are
active (the LED number is lit):
Front camera , high definition (HD)
This is Camera 1.
Cabin camera, standard definition (SD), or Panoramic camera, SD
If present, Camera 2 is the first SD camera in the 4RE system.
Rear camera, SD
If present, Camera 3 is the second SD camera in the 4RE system. Camera 3 is only present
if the Camera 4 connection is not used.
Auxiliary ( Aux ) cameras, SD
If present, Camera 4 can be connected to between one and four auxiliary cameras.
Note: Each 4RE system can contain a maximum of six cameras.
To see which cameras are connected to the system and their current state:
n
Press the Cameras control
Buttons appear on the Display screen representing each camera. Each button shows the
camera name and its state.
The available states depend on how the DVR is configured and what each camera supports. The
possible states are:
On : The camera is active and recording to the hard drive ( √ ).
Off : The camera is inactive and NOT recording ( ).
Background : The camera is active and recording to the hard drive. You may have the option
to include (or exclude, by default) while tagging an event (page 75) . ( √ ).
78 4RE In-Car Video User Guide 4.0.6
WGD00089 Revision D