4
Limited Warranty
Cornick Pty Ltd (Seller)
warrants its products to be in conformance with its own plans and specifications and to be free from
defects in materials and workmanship under normal use and service for twelve months from the date of original purchase.
Sellers obligation shall be limited to repairing or replacing, at its option, free of charge for materials or labor, any part which is
proved not in compliance with Sellers specifications or proves defective in materials or workmanship under normal use and
service. Seller shall have no obligation under this Limited Warranty or otherwise if the product is altered or improperly repaired
or serviced by anyone other than Seller.
For Warranty Service:
Return transportation prepaid with a copy of your purchase receipt and contact details to:
RhinoCo Technology, 9 Hannabus Place, McGraths Hill, NSW 2756 Australia
.
Seller has no obligation to attend the buyer’s location to retrieve the goods or make repairs onsite.
•
There are no warranties, expressed or implied, of merchant ability, or fitness for a particular purpose or otherwise, which
extend beyond the description on the face hereof. In no case shall seller be liable to anyone for any consequential or
incidental damages for breach of this or any other warranty, express or implied, or upon any other basis of liability
whatsoever, even the loss or damage is caused by its own negligence or fault.
•
Seller does not represent that the products it sells may not be compromised or circumvented; that the products will prevent
any personal injury or property loss by burglary, robbery, fire or otherwise; or that the products will in all cases provide
adequate warning or protection. Customer understands that a properly installed and maintained alarm system may only
reduce the risk of a burglary, robbery, or fire without warning, but it is not insurance or a guarantee that such will not occur
or that there will be no personal injury or property loss as a result.
•
Consequently, seller shall have no liability for any personal injury; property damage or other loss based on a claim the
product failed to give any warning. However, if seller is held liable, whether directly or indirectly, for any loss or damage
arising under this limited warranty or otherwise, regard less of cause or origin, seller's maximum liability shall not in any
case exceed the purchase price of the product, which shall be the complete and exclusive remedy against seller.
•
This warranty replaces any previous warranties and is the only warranty made by the Seller on this product. No increase or
alteration, written or verbal, of the obligations of this Limited Warranty is authorised.
TROUBLE SHOOTING
If you are having trouble operating this product, please consult the guide below:
SYMPTOM
REMEDIES
No camera picture
1. Check all connectors. Make sure camera(s) and monitor are
switched ON.
2. Ensure monitor is set to receive correct channel(s).
3. Make sure camera/s are within range of monitor.
Blank monitor
1. Make sure monitor is switched ON.
2. AC adapter - make sure it is plugged in.
Interference on camera picture
1. Make sure each camera (transmitter) is within range, and that
no large obstructions are blocking the signal.
2. Try adjusting monitor antenna or repositioning the camera or
monitor or both to improve the reception quality.
3. If a camera is positioned close to the receiver, point antenna
away from the receiver.
4. Reposition other nearby equipment transmitting on the 2.4 GHz
frequency.
Audio problems
1. Ensure the volume is turned up sufficiently on the monitor
2. Make sure the sound is within the microphone range.
3. If the unit emits a loud wailing sound (feeds back), try moving
the camera away from the monitor
