BEACON SOUNDER
detection
watch
gas
3
DESCRIPTION
The Beacon Sounder has 38 Ultra Bright, RGB LEDs with 360° visibility and Piëzo sounder,
107 dB @ 1 meter. The visual and audible modes can be used independently or combined
in any required combination by analog or digital trigger.
IMPORTANT:
This user manual contains important information regarding the operation of
the Beacon Sounder. Ensure you read this user manual fully before installing and opera-
ting the Beacon Sounder. If you are installing this Beacon Sounder for use by others, you
must leave this manual with the end user. Installation must be carried out, in accordance
with latest codes and regulations, by a qualified electrician.
WARNING
• Ensure power source is disconnected prior to installation or maintenance to avoid da-
mage to the Beacon Sounder or electric shock.
• Do not handle internal electronical components whilst wiring up. Environmental ex-
posure during installation should be under dry circumstances, avoid heavy moist and
wet conditions. The Beacon Sounder is only weatherproof to IP65 when mounted
upright.
• Use M4 screws, washers and nuts (4 pieces supplied) to secure beacon to its moun-
ting. Do not mount the Beacon Sounder on places with excessive vibrations.
• Do not use solvents or cleaners on the Beacon Sounder, as they may cause damage to
the beacon lens or circuitry. The unit can be wiped with a slightly damp cloth.
DISPOSAL
The Beacon Sounder should not be disposed with your other household waste. The Be-
acon Sounder is ideally suited for disposal within the waste electronic and electrical
equipment (WEEE) recycling scheme. Check at your local authority, retailer or contact
our technical support team for recycling / disposal advice as regional variations apply. You
may return the unit to us for safe dismantling and disposal.
DocuSign Envelope ID: AD1219C0-C292-4C55-B2EE-1190F300B975
