manualshive.com logo in svg

Wassp WMB-3230, Руководство оператора

Поделиться
Скачать
Wassp WMB-3230 Скачать руководство пользователя страница 50

Doc. P/N: 

WSP-009-008

Version: V1.3
Issue Date: 

April 2014

www.wassp.com

44 

6.10 

Hue

The Hue or Colour Scheme of the Sonar and Single Beam acoustic displays can be 
changed by using  this button. The button cycles through three (3) hue presets:

6.11 

Day/Night Mode

By default, the WASSP program runs in Day Mode. This means that the user interface 
and all windows are shown with normal brightness as required during day time or bright 
ambient light conditions.

If the WASSP program is being used during the night time or in reduced lighting conditions, the user 
may find it more comfortable to use 

Night Mode

. Night Mode darkens the entire user interface so that 

the user is able to use the program in a darkened wheelhouse without having to allow time for the 
eyes to adjust to a bright screen.

The 

Day/Night Mode icon

 is used to toggle 

Day Mode

 (normal operation) and 

Night Mode

.

The brightness of the user interface while Night Mode is enabled can be set in the System Tab of the 
System Configuration (see page 46). The selectable Night Mode brightness value ranges from 

10%

 

(darkest) to 

90%

 (brightest).

Adjusting the display brightness on the monitor you are using can also be used to reduce / increase 
the screen brightness.

Black

White

Blue

Содержание WMB-3230













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды