Page - 04
Switching the button to “O” position will deactivate the device. The light will not switch
on at any time.
The motion sensor has three knobs which you can set:
1. Brightness Settings
2. Motion Detection Range
3. Illumination
• The LED light has three brightness levels (Low, Mid, High) and can be adjusted
using this button.
• The motion sensor has three distance thresholds (Low - 13 ft, Mid - 23 ft,
High - 33 ft) and can be adjusted using this button.
• The threshold is the motion sensor’s maximum detection distance.
Adjust it based on the mounting location and environment of the
spotlight.
• These threshold measurements are based on the assumption that the
device is mounted at least 7 ft above the ground with an ambient
temperature of 59 °F (15 °C).
• The LED light has four illumination durations (15 sec., 30 sec., 1 min., 3 min.) and
can be adjusted using this button.
• The duration is the time the LED light will stay on when movement is detected
at nighttime.
The light only activates in darkness. Photocell sensitivity determines how dark it needs to be for the light to
activate.
The device is equipped with a dusk sensor. When the device is activated (I/O switch is in the “I” position), the
battery will be automatically recharged during the day, and the light will turn on at night. The device
automatically switches to battery recharging mode at daytime.
Parameter Settings
a. Choose low sensitivity to activate the light only when it is very dark.
b. Choose high sensitivity to have the light activate at around dusk and remain activated until later in the
morning.
Need help? Send us an email at: [email protected]
