Page - 05
App Pairing
•
The Wstein app is the central hub for your smart home devices.
•
Control all your Wasserstein smart devices from one app.
•
Go to the Wstein App.
•
Press “Add Device” or “+” on the upper right corner.
•
Choose “Smart Camera” then click “Next”.
•
Choose “Wi-Fi” then click “Next” and “Continue”.
•
A QR Code will appear on the screen.
•
Press and hold the sync button located at the bottom- rear side.
The LED light should flash red until it scans the QR code. Slightly
twist the battery compartment sideways if you cannot access the
sync button.
•
Use the camera to scan the QR code 15 to 20 cm from the mobile phone.
•
Once the camera scans the QR code, it will sound a beep indicating it has detected the code.
•
Press the “I heard a prompt” message on your mobile phone once beep has been detected to
start the connection process.
•
Once completed, you should see the text “CONNECTED” on the Wstein app.
•
After successful pairing, you can rename the camera accordingly. Press “Done” to complete the setup
process.
•
Make sure your mobile device is connected to a 2.4 Ghz Wi-Fi network.
Step 1: Download “Wstein” from the App Store, Google Play Store, or simply scan this QR code
for installation.
Step 3: Open the app and create a new Wstein Account.
Step 4: Connect the Battery Camera to the Wstein app.
Step 2: Connect your mobile device to your home Wi-Fi network.
LED Light
Sync Button
