page 5
page 4
page 6
page 7
5. Press and hold the control button. Release it until
indicator starts blinking.
6. Adding device, it takes about 2 minutes.
8. If the device fails to add, repeat from step 3.
9. Press the test button. The alarm will sound and you
will receive an alert via the App.
10. After the detector is triggered, turn it off by
following the on-screen prompts and click
"Alarming, click to turn off the sound.”
Note: The smoke alarm Wi-Fi module will be
activated 10 minutes after it’s triggered, during
this period, remote muted is available.
Note: The alarm will stay silent for 9 minutes. If
there is still smoke detected after 9 minutes, the
alarm will sound again.
Test the alarm by pressing the button at the top of
the smoke detector. The alarm is loud so test with
caution.
1. Preparation
Determine how many alarms you need and where is
best to install them.
2 Installation
Disconnect the alarm module from the base module
by twisting the base module counterclockwise.
Note: The smoke detector will power on
automatically after the alarm module is attached to
the Wi-Fi module.
7. Added successfully, click Done.
Ways to silence the alarm:
1. Click the mute button on the APP.
2. Press the TEST/HUSH button for a 2 seconds.
Installation
After installing the alarm, attach the alarm module
back on the WiFi module. Turn until you feel a click
to ensure the Alarm Module is secured in place.
