Wassermann Wapo-Ex 8 plus, Руководство пользователя

Страница: 13 / 28

Polymerization
Stop / Pause Cancel Pause Back Start
Preheating Temperature
Defines the target temperature once the main switch has been activated.
The preheat temperature also applies to waiting times and rest periods. Default: 65°C
If the programme temperature selected is higher, the temperature falls back to
this value when the programme ends.
After defining the desired mode it may make sense to adjust the preheat temperature
of the programme temperature. This avoids long heating up or cooling down phases.
The preheating temperature can be up to 8 ° C higher than the program temperature so
that the program can run. The controller will then adjust (reduce) the temperature to the
programmed value.
13
14
6b
7
14