Wassermann Polyquick 160-T95, Руководство пользователя

Страница: 6 / 28

For safety reasons, the pressure setting is limited to max. 6 bar (at 20 ° C).
Depending on the level of the heating temperature, the pressure can increase.
4 Responsibility for Operation or Damage
The responsibility for operating the unit lies exclusively with the owner or user if said unit is
incorrectly serviced, maintained or altered by persons not employed by an authorised
dealer or if the unit is used in a manner contrary to its specified purpose.
The unit has to be maintained and operated in accordance with this user manual.
Wassermann Dental-Maschinen GmbH is not responsible for damage arising from the
nonobservance of these instructions.
Warranty and responsibility provisions contained in the sales and supply conditions of
Wassermann Dental-Maschinen GmbH are not extended by these instructions.
5 Application
The Polyquick 160-T95 is a pressure polymerisation unit for hot and cold polymerisation
of plastics. This automat is designed for polymerisation of up to 3 flasks in flask holder or 2
cast resin flasks or rebasing frames or 6 orthodontic regulatings at one time. It can be set
to a maximum temperature of 95 °C and the polymerisation pressure can be adjusted to a
maximum of 6 bar. In automatic mode, the polymerisation time can be preselected up to
99 hours. A touch screen and the newly developed control panel allow the user to set the
relevant parameters quickly and easily using self-explanatory symbols.
The Polyquick 160-T95 can also be used as a pressure compactor without heating.
Furthermore, dry compression is possible up to a maximum of 70°C. For thermodynamic
reasons, the display value must be increased by 10 °C;
i.e. max. 70°C dry compression = max. 80 °C display value.
Only use the unit for this type of application.
6
www.stomshop.pro