Wasp WPA 1000II, Руководство пользователя, Страница: 12 / 29

WPA 1000II User Manual
3. If you remove the main battery and plug it back in before the backup battery lost
power, WPA 1000II will warm start.
4. If you remove the main battery and plug it back after the backup battery lost
power, WPA 1000II will clean boot.
1.4.2 Charging the WPA 1000II
For initial use, you need to charge your device for about 16 hours. After that, you can
charge it everyday to recharge the battery to full capacity. You can charge your device
using the USB charging cable or the docking station.
CAUTION! Operating the WPA 1000II for the first time without the AC adapter, and
without fully charging the backup battery may result in loss of data stored
in RAM memory.
NOTE: Data you entered may not be properly stored until the internal backup battery
has been fully charged.
To charge the device using the USB charging cable:
1. Attach the clip plug to the AC adapter, if necessary. Slide the replaceable clip
plug into the AC adapter until it locks into place with an audible click.
2. Press and hold the connector button on the USB charging cable and connect it to
the WPA 1000II (1).
3. Plug the AC adapter cable into the power jack on the USB charging cable (2).
4. Connect the AC adapter into an electrical outlet (3).
6