Wasp WDT2200, Руководство пользователя, Страница: 17 / 20

.
© 2003 Wasp Technologies, Inc. - 10 -
Source Dest. Function
file1 file2 copy file1 to file2
file1 COM output content of file1 to serial port
file1 CON output content of file1 to LCD
COM file2 input data from the serial port and store in file2
CON file2 input data from the keyboard and store in file2, press [CMD] and then the [ALPHA] key
to end the data input
SET
This command allows users to set
system date and time, assign laser
features and enable the display of the power-on logo
(see next section).
3.3 Configuring the Terminal via the SET command
There are three categories of general system configuration available via the SET
command. Select the corresponding number, 1 through 3, to set system date/time,
assign scanning features or enable the power-on logo display. Hit [CMD] and then
the [ALPHA] key to return to
User mode prompt
.
3.3.1 DATE & TIME:
Setting system clock & calendar
When “
1.DATE & TIME
” is selected in the
SET command menu
, the screen as right
will be shown on terminal’s LCD and let you set the system date and time of Real Time
Clock chip (RTC). The system date and time can be retrieved in application and used as
time stamp for data collection.
The second line shows the current date in the format YYYY/MM/DD (year/month/day).
If you want to reset the system date to January 1, 1997, then enter [1][9][9][7],[0][1],[0][1]. Or press the [ENT] key
to skip the system date setting.
The third line shows the current time. The way to set system time is similar to setting system date as described
above. The format of system time is expressed as a 24 hour clock fitting HH:MM:SS (hour:minute:second).
3.3.2 SCANNER:
The PDT’s system software decodes all major bar code symboloies including Code 39, Code 128, Codabar, Code
93, I25, EAN, UPC, etc. Use the [ ] key to toggle between selections in each category, then press [ENT] to
confirm.
SCANNER
Enable / Disable bar code decoding.
PEN SCAN KEY When pen scanner is used on the WDT2200, a user can specify whether pressing the trigger
key will enable the pen scanner. If
ENABLE
is selected, the user must press and hold down
the trigger key to scan a barcode label. If
DISABLE
is selected, a user can directly scan
barcode label without pressing the trigger key. Enable / Disable (Optional).
VERIFICATION Enable / Disable double check scanned barcode.
<SYSTEM SETUP>
1.DATE & TIME
2.SCANNER
3.DISPLAY
4.KEYPAD
5.EXIT
DATE-TIME
SETUP
1998/01/01
08:00:00