Wasp WDI4700, Краткое руководство пользователя

Страница: 31 / 48

Reading Parameters
Quick Reference Guide 21
Reading Parameters
Move the reader toward the target and center the aiming pat-
tern and illumination system to capture and decode the
image. See
"Using the Wasp WDI4700" on page 5 for more
information.
The aiming system will briefly switch off after the acquisition
time, and if no code is decoded will switch on again before the
next acquisition. The illuminator will remain on until the sym-
bol is decoded.
As you read code symbols, adjust the distance at which you
are holding the reader.
Aiming System
A number of options for customizing control of the Aiming Sys-
tem are available. See the Wasp WDI4700 PRG for more infor-
mation and programming bar codes.
Good Read Green Spot Duration
Successful reading can be signaled by a good read green spot.
Use the bar codes that follow to specify the duration of the
good read pointer beam after a good read.

= default value
GOOD READ GREEN SPOT DURATION
ENTER/EXIT PROGRAMMING MODE
Disabled

Short (300 ms)
Medium (500 ms)
Long (800 ms)