Wasp WDI4200, Краткое руководство пользователя

Страница: 37 / 44

Troubleshooting
Quick Reference Guide 27
Wasp Technologies Limited Factory Warranty
Warranty Coverage
Wasp warrants to Customer that Wasp's products will be free
from defects in materials and workmanship for a period of three
years from product shipment. Wasp Barcode Technologies
("Wasp") hardware products are warranted against defects in ma-
terial and workmanship under normal and proper use. The liability
of Wasp under this warranty is limited to furnishing the labor and
parts necessary to remedy any defect covered by this warranty
and restore the product to its normal operating condition. Repair
or replacement of product during the warranty does not extend
the original warranty term. Products are sold on the basis of spec-
ifications applicable at the time of manufacture and Wasp has no
obligation to modify or update products once sold. If Wasp deter-
mines that a product has defects in material or workmanship,
Wasp shall, at its sole option repair or replace the product without
additional charge for parts and labor, or credit or refund the defec-
tive products duly returned to Wasp. To perform repairs, Wasp
may use new or reconditioned parts, components, subassemblies
or products that have been tested as meeting applicable specifi-
cations for equivalent new material and products. Customer will
allow Wasp to scrap all parts removed from the repaired product.
The warranty period shall extend from the date of shipment from
Wasp for the duration published by Wasp for the product at the
time of purchase (Warranty period). Wasp warrants repaired hard-
ware devices against defects in workmanship and materials on
the repaired assembly for a 90 day period starting from the date
of shipment of the repaired product from Wasp or until the expi-
ration of the original warranty period, whichever is longer. Wasp
does not guarantee, and it is not responsible for, the maintenance
of, damage to, or loss of configurations, data, and applications on
the repaired units and at its sole discretion can return the units in
the "factory default" configuration or with any software or firm-
ware update available at the time of the repair (other than the
firmware or software installed during the manufacture of the
product). Customer accepts responsibility to maintain a back up
copy of its software and data.
Refer to:
http://www.waspbarcode.com/support/warranty-claims
Warranty Claims:
http://www.waspbarcode.com/support/warranty-claims