Wasp Wasp WDI7500, Руководство по продукции

Страница: 217 / 310

Enter/Exit Programming Mode
Product Reference Guide 207
CONFIGURATION UPDATES
See page 261 in “References” for detailed information and examples of
these features.
Automatic Configuration Update
When this feature is enabled, a reader and its linked Base Station can auto-
matically ensure they stay in sync with regard to application hardware and/
or configuration. See page 261 for more information on this feature.
$CBTCU00(CR)
Automatic Configuration Update = Disable
$CBTCU01(CR)
Automatic Configuration Update = Enable
DEFAULT
Copy Configuration to Scanner
Scan the following label to copy the current Base Station configuration to the
scanner. Use this method when the Auto Configuration Update feature is
disabled and you want a one-time configuration update to be performed on
the scanner.
CpyCfg2HH
Copy Configuration to Scanner
Do not scan an ENTER/EXIT PROGRAMMING MODE label with this bar-
code.
Copy Configuration to Base Station
Scan the following label to copy the current scanner configuration to the
Base Station. Use this method when the Auto Configuration Update feature
is disabled and you want a one-time configuration update to be performed
on the Base Station.
Copy Configuration to Base Station
Cpycfg2Ba
Do not scan an ENTER/EXIT PROGRAMMING MODE label with this barcode.
$CCpyCfg2HH