Wasp HC1, Быстрый старт

Страница: 8 / 12

6
Rev. 4/12/2012
Wasp HC1 QuickStart Guide
Charging the Battery
CAUTION: Turn ON the backup battery switch before charging the battery. Data you entered may not
be properly stored until the built-in backup battery has been adequately charged.
1.
Press and hold the release button on both sides of the USB charging cable and connect it to the
HC1 (1).
2.
Plug the AC adapter cable into the power jack of the USB charging cable (2).
3.
Plug the AC adapter cord into an electrical outlet (3).
Using the MicroSD Memory Card
1.
Remove the two screws on the MicroSD
slot shield and remove the shield.
2.
Insert the MicroSD card with the notched corner as
shown.
3.
Push the card into the slot until you feel the MicroSD card
click into place.
4.
Screw the MicroSD compartment cover back into place.