Inserting and removing the Micro SD-Card
1. Insert Micro-SD card so that the connections are facing towards rear of camera.
2. Removing the Micro SD-Card:
• Turn OFF camera
• Press on edge of the storage card slightly, it will eject automatically
Notice: Please ensure you install the Mirco-SD card correctly. Reversed inserting may
cause damage to camera and SD card.
Charging the Battery
Connect camera and power supply using the included USB cable and wall charger.
During charging, the indicator is red. When battery is fully charged, the indicator
will turn off. Estimated charging time: about 2 hours.
Notice:
• To improve charging efficiency, please turn OFF camera during charging.
Button Functions
• Power button turns camera ON and OFF
• Mode Selection Key: Switches between Photo mode, video mode or car mode
• Shutter Button: Snaps a photo and starts/stops video recording.
While in Standby mode, Hold down Shutter button for 3 seconds to switch to
Photo mode or video mode. (This allows user to switch to Photo and Video-
mode freely when underwater and using the waterproof case.)
4
