10
Chapter 4
10
CONNECTION AND SCAN OPTIONS
11
Start and Stop Pin
Use the Start and Stop Pin barcodes if you are prompted for a password during Bluetooth pairing. To use this setting:
1. When prompted for a password, scan the Start Pin barcode
2. For each digit in the password shown on your screen, scan the corresponding barcode (below).
3. Scan ENTER.
4. Scan the Stop Pin barcode.
Now the Pin is set and the scanner should pair to the PC. Test the connection by scanning a barcode from WordPad, NotePad or the
equivalent and verifying the scan is correct.
Start Pin
Stop Pin
ENTER
Scan the numbers for your password, then scan ENTER.
When numbers have been entered, scan Stop Pin.