Washtech CD120 Скачать руководство пользователя страница 2

Warnings

Before installation and commissioning, you must read the safety instructions and 
warnings carefully and all the warning labels attached to the equipment.

Equipment contains dangerous voltages and can be hazardous if installed or 
operated incorrectly. Non-compliance with warnings or failure to follow the 
instructions contained in this manual can result in loss of life, severe personal 
injury or serious damage to property.

Before installation or repair, you must read the instructions and warnings 
carefully and all the warning labels attached to the equipment.

All service/repair work must be carried out by qualified personnel only and 
ensure compliance with all local codes and standards including AS/NZS 3500.1. 

Important Information

Failure to comply (even partially) with the instructions given in this manual will 
invalidate the product warranty and relieves the manufacturer of any 
responsibility. 

The alteration of machine operation, design or the replacement of parts not 
approved by the manufacturer may void warranties and approvals.

This machine is intended for commercial use only.

This machine is designed for the cleaning of fresh food waste from crockery, 
cutlery, containers and food preparation and manufacturing equipment. Consult 
the manufacturer regarding suitability of the machine for other applications. It is 
not a waste disposal unit, and it is essential that significant loose soil or waste is 
removed from washware by pre-rinsing or scraping, before it is placed in the 
machine. 

The information contained in this document is checked, reviewed and updated regularly to 
ensure that it is accurate and relevant to the model described. However discrepancies and 
errors can occur. We welcome your feedback. 

Document subject to change without prior notice.

Information supplied in this manual is copyright. No part of this work may be reproduced or 
copied in any form or by any means, electronic or mechanical without the express permission of 
Washtech.

4/26/2022

2

Washtech CD120L Operator Manual

Содержание CD120

















Отзывы: