
28
OPTOIN-PCIe32
STANDARD
© 2019 by Messcomp Datentechnik GmbH
DV01
28
OPTOIN-PCIe32
STANDARD
© 2019 by Messcomp Datentechnik GmbH
EV01
28
28
wasco
®
wasco
®
11. Specifications
Optocoupler Inputs
Optocouplers LTV-244 or compatible
32 channels, optically isolated
Galvanic isolation even between every single channel with each two se-
parate connectors
Overvoltage protection by protection diodes
Two different input voltage ranges selectable by jumpers:
Range 1 high = 14..30 Volt
low = 0..2 Volt
Range 2: high = 5..15 Volt
low = 0..1 Volt
Input frequency: ma. 10 kHz
Board Identification
Jumper block with five pairs of contact pins
Connection plug
1 * 68-pin SCSI socket
Bus system
32-bit PCIe Bus (16 or 32 bit data access)
Measurements of the Board
94 mm x 111 mm (l x b)
standard height, full length card
6- layer multilayer PCB
Other
Control LEDs for power supply
11. Technische Daten
Digitale Eingänge über Optokoppler
Optokoppler: LTV-244 oder kompatible
32 Kanäle, galvanisch getrennt
Galvanische Trennung auch zwischen den einzelnen Kanälen mit zwei
separaten Anschlüssen für jeden Kanal
Überspannungsschutz durch Schutzdioden
Zwei Eingangsspannungsbereiche durch Jumper wählbar:
Bereich 1
high = 14..30 Volt
low = 0..2 Volt
Bereich 2: high = 5..15 Volt
low = 0..1 Volt
Eingangsfrequenz: max. 10 kHz
Board-Identifikation
5-fach Jumperblock
Anschlussstecker
1 * 68polige SCSI-Buchse
Bussystem
32 Bit PCIe-Bus (16 oder 32 Bit Datenzugriff)
Abmessungen der Platine
94 mm x 111 mm (l x b)
standard hight, full length card
6-lagige Multilayer-Platine
Sonstiges
Kontroll-LEDs für Spannungsversorgung