1
2
3
4
Make sure that the surface of
your RockBoard is clean and
dry. Decide whether you want
to apply the rough or the soft
side of the Hook and Loop tape
to your RockBoard.
Cut the Hook and Loop tape to
the preferred length and apply
the opposite side of the tape to
the bottom of your pedals.
It is recommended to apply the
Hook and Loop tape to a clean,
flat surface for best contact.
Put the pedals to preferred
locations. Route cables accor-
ding to final signal chain.
Put pedals into final position
and eventually secure cables
with included zip ties for a
clean, professional setup.
HOW TO SET UP YOUR NEW ROCKBOARD
USA Distribution
[email protected] I www.rockboard.net I www.facebook.com/warwickmusicdistribution
Warwick GmbH & Co. Music USA, Inc. / 1922 Air Lane Drive / Nashville, TN / 37210 / (629) 202 - 6790
European Distribution
[email protected] I www.rockboard.de I www.facebook.de/warwickmusicdistribution
Warwick GmbH & Co. Music Equipment KG, Gewerbepark 46, 08258 Markneukirchen / Germany
