Warwick Corvette Standard, Руководство пользователя

Страница: 10 / 20

10
Volume Control
Pickup
Pan Control
Tone Control
Push/Pull
Volume Control
Pickup
Pan Control
Stacked Bass/Treble
Tone Control
Bridge
Bridge
Model Specifics
Each of the following diagrams is viewed as if you are wearing the bass and you are looking down at the knobs and pickups.
Corvette Std. passive
1 Volume Control (Part #M85500 - 500K)
1 Pick-up Pan Control (Part #M86252 – 2 x 220K)
1 Tone Control (Part #M81500 – 500K Log)
Corvette Std. Activ, Corvette ProLine
These Corvette basses come with an onboard active preamp.
Push/Pull Volume Control (Part #M84500 - 500K)*
Pick-up Pan Control (Part #M85252 – 25K with active pickups, Part # M86252
with passive pickups)
Stacked Tone Control (Part #M85110 – 2 X 100K)**
* By pulling on the volume knob, you will bypass the onboard active preamp, which effectively deactivates the tone controls.
**The top knob boosts or cuts the treble and the bottom knob boosts or cuts the bass.
**N
**B
Push/Pull
Volume Control
Pickup
Pan Control
Treble
Tone Control
Bridge
Corvette $$
All Corvette $$ basses come with an onboard active MEC 2-way circuit.
Push/Pull Volume (Part #M84500 500K)*
Pickup Pan Control (Part #M86252, 2x220K)
Treble Tone Control (Part #M85100 - 100K)
Mid Tone Control (Part #M86252, 2x220K)
Bass Tone Control (Part #M85100 - 100K)
Bass
Tone control
* By pulling on the volume knob, you will bypass the onboard preamp.
** When the switch is in the up position the neck (N) / bridge (B) pick-up is humbucking and routed in series.
When the switch is in the middle position the neck (N) / bridge (B) pick-up is single coil and both routed as humcanceling with each other in single coil.
When the switch is in the down position the neck (N) / bridge (B) pick-up is humbucking and routed in parallel.