E
N
G
L
IS
H
12
FRONT PANEL CONTROLS
ACTIVE
– Input to plug in shielded guitar cable. This input is low sensitivity to suit the output from
guitars with active electronics.
PASSIVE
– Input to plug in shielded guitar cable. This input is high sensitivity to suit the output from
passiveguitars.
GAIN
– Controls the input signal level to the preamp.
COMPRESSION
– Controls the amount of compression applied to the signal.
MUTE
– Switch mutes all outputs, except the tuner out and the headphone out. LED is provided next
to this switch to indicate when the amplifier is muted.
COMPRESSION IN/OUT
– Switches the compressor circuit in and out of the signal path.
EQUALIZER
– 10-band graphic equalizer section. Sliders c/- 12dB of gain at the frequency indicated
below each control..
EQ IN/OUT
– Switches the EQ circuit in and out of the signal path
BASS
– Shelving Bass Control gives +/- 18 dB gain at 60 Hz.
TREBLE
– Shelving Treble Control gives +/- 18 dB gain at 10 Hz.
VOLUME
– Controls the main output volume. Adjust this for your preferred overall playing volume.
AUX IN
– Input to connect external sound source. This can be used for plugging a CD, tape or MP3
player into the amp for practicing, rehearsing or for connecting a second preamp into the
system.
HEADPHONE
– Output for connecting a headphone. Dedicated stereo headphone amp. It is recommended to
mute the amp when using headphones.
WA600
咥㡆ϱॄ
WA300
咥㡆ϱॄ
BC300
咥㡆ϱॄ
WA600
咥㡆ϱॄ
WA300
咥㡆ϱॄ
BC300
咥㡆ϱॄ
WA600
咥㡆ϱॄ
WA300
咥㡆ϱॄ
BC300
咥㡆ϱॄ
All manuals and user guides at all-guides.com
