Warwick BC20, Руководство пользователя, Страница: 14 / 18

C
O
M
B
O
16
FRONT PANEL CONTROLS
BC80 AND BC150
ACTIVE – Input to plug in instrument using shielded guitar cable. This input is low sensitivity to suit the output
from instruments with active electronics.
PASSIVE – Input to plug in instrument using shielded guitar cable. This input is high sensitivity to suit the output
from instruments with passive electronics.
VOLUME – Controls the sound level of your instrument. Adjust this for your preferred playing loudness .
BASS – Shelving Bass Control gives +/- 12 dB gain at 60 Hz. The control is flat at the center position.
LOW MID – Peaking Middle Control gives +/- 8 dB gain at 800 Hz. The control is flat at the center position.
HIGH MID – Peaking Middle Control gives +/- 8 dB gain at 2.5 kHz. The control is flat at the center position
TREBLE – Shelving Treble Control gives +/- 12 dB gain at 10kHz. The control is flat at the center position.
AUX IN – Input to connect external sound source. This can be used for plugging a CD, tape or MP3 player into
the amp or for connecting an external preamp.
HEADPHONE – For practice use in situations when speakers are too loud. Dedicated Stereo Headphone amp where
the aux input will be played back in stereo and the instrument signal will be reproduced in the center of
the stereo field.
LINE OUT – For connecting Amp to PA system, recording device or similar.
SEND RETURN – Here you can connect effects boxes and similar for insertion in the effects loop.