Warwick Amplifier Quad IV, Руководство пользователя

Страница: 4 / 6

17
Quad IV & VI
17
QUADRUMATRIX
Q 1 Q 2
Q 4 Q 3
Characteristic
Characteristic
Characteristic
Characteristic
DI OUT Balanced output for the connection to a
mixing desk (PA or Studio).
EFF. SEND & EFF. RETURN Sockets to
implement the effects loop. Connect the input of
the effects device to the
SEND socket and its
output to the RETURN socket.
EFF MIX control determine the degree to which
the effects within the parallel loop affect the signal.
SPEAKER OUT sockets designed to supply
speaker cabinets. XLR and Speakon connected
parallel.
1. Make sure that the device is plugged in to the
mains and that any external (effects) devices are
correctly connected and operation-ready.
2. Connect your bass to the amplifier´s
INPUT
using a shielded line cable.
3. Turn on the power using the POWER switch.
4. At the conclusion of the valve(tube) warm-up
phase turn the
MUTE switch off
5. Use the GAIN control to set the minimum
level or the desired tube compression
6. Set the desired output volume with the
MASTER control.
7. Adjust the controls to obtain the desired sound.
To get to know the fundamental sounds of the
QUAD IV/VI, it is advisable to begin by setting all
the tone controls to 12 o'clock, before using the
QUADRUMATIX switch to adjust each of the
four fundamental sounds in turn.
POWERING UP