WÄRTSILÄ RadaScan RESPONDERS 3 Series, Руководство пользователя

Страница: 11 / 18

1.4
The rechargeable Responder should be fully charged before use.
A full charge takes approximately 24 hours.
Installing Responders 1
11 94-0649-A
Charging Responders
! DO NOT charge Responders in an explosive atmosphere or other hazardous
environment.
The Responder should be switched off while charging.
To Charge the Responder:
! Note: Only use the supplied charger. Only charge at ambient temperatures of
0
o
C to +45
o
C.
1. Switch the Responder off and unscrew the charging socket cap on the rear of
the unit.
2. Remove the Responder from the hazardous location.
3. Connect the supplied mains charger (Part No. 39-0049-2).
(Input: 100–240VAC, 50–60Hz, 1.5A Output: 24VDC, 2.5A, 60W).
4. When charging is complete, disconnect the power from
the unit and replace the charging socket cap.
Charging Socket
Rechargeable Responder - Rear