
ASSEMBLy INSTRUCTION
8
ASSEMBLy INSTRUCTION
CAUTION
Battery needs full charging before first use.
IMPORTANT!
The battery pack (BP8301-2.5) is
not charged when it is purchased. Before using the
hedger for the first time, place the battery pack on
the battery charger and charge. Make sure to read
all safety precautions, and follow the instructions in
the Battery Charger section
To install the battery:
1. Align the tongue (3) of the battery pack with the
cavity in the handle housing.
2. Grasp the rear handle (2) firmly.
3. Push the battery pack into the handle until the
latch locks into place
NOTE:
The battery pack fits snugly into the handle to
prevent accidental dislodging. It may require a strong
pull to remove.
To remove the battery:
–
Press Battery pack release button (1) and hold.
–
Grasp the rear handle (2) firmly. Pull the battery
pack out of the handle.
CAUTION
IMPORTANT!
Never remove the blade assembly
unless it needs sharpening, straightening, or
replacing. Always take it to a qualified repairer or
agent for repair.
WARNING
Follow these instructions in order to avoid injury and
to reduce the risk of electric shock or fire:
–
Arsenic and chromium from chemically treated
lumber.
–
Replace the battery pack or the charger immediately
if the battery case or charger cord is damaged.
–
Verify that the switch is in the OFF position before
inserting or removing the battery pack.
–
Verify that the battery pack is removed and the switch
is in the OFF position before inspecting, adjusting, or
performing maintenance on any part of the hedger.
–
Read, understand and follow the instructions
contained in the section entitled Charging Procedure.
Chain & Chain Bar
WARNING
The installation direction of the chain MUST be
consistent with the marking on the housing,
incorrect installation will cause the machine to
fail, damage or even work properly this can result
serious personal injury or death.
To install the chain and chain bar
1. Place the side of the housing on the horizontal
plane, turn the knob counterclockwise to remove
the side cover(1).
2. Take out the chain (2) and chain bar (3), assemble
the blade direction of the chain as shown.
Chain
Oil pot cover
1
1
2
3
Oil Pot
Chain Bar