Page 2
For technical questions, please call 1-800-444-3353.
Items 68113/68990
IMPORTANT SAFETY INFORMATION
1.
Wear ANSI-approved safety goggles
and heavy-duty work gloves
during setup and use.
2.
Set contains sharp blades.
Keep away from children.
3.
Use correct size arbor for
selected Hole Saw.
4.
Verify drill’s chuck is in good
condition and fits securely.
5.
Do not use excessive pressure
when cutting a hole.
6.
Use as intended only;
do not modify tools.
7.
Inspect before every use; do not
use if parts are loose or damaged.
8.
Use both hands when drilling and
keep blade at 90° to workpiece.
9.
Store saw blades in Case in secure
location away from children.
10.
Read and adhere to all safety
warnings and operating instructions
of drill used with Set.
11.
The warnings, cautions, and
instructions discussed in this
instruction manual cannot cover all
possible conditions and situations
that may occur.
It must be understood
by the operator that common sense
and caution are factors which cannot
be built into this product, but must
be supplied by the operator.
SAVE THESE INSTRUCTIONS.
Setup
TO PREVENT INJURY:
Wear heavy-duty work gloves and ANSI-approved safety goggles
during setup and whenever handling the saws.
1. Select the desired size Hole Saw and
either the Large or Small Mandrel.
NOTE:
Unthread the 2-1/2″ and 2-1/8″
Hole Saws from one another before use.
2. The correct size Mandrel will fit
exactly into the Hole Saw.
3. Use the Adapter to attach the Small
Mandrel to medium size Hole Saws
(such as 1-3/8″ and 1-1/2″ sizes.)
Carefully thread the Adapter into
the Hole Saw and then thread the
Small Mandrel through the bottom
so that it screws into the Adapter.
4. To attach Hole Saw to the
Large Mandrel, see illustrations
and instructions on facing page.
5. Open Jaws of Drill Chuck
(sold separately).
6. Place the Mandrel Shaft
completely into the Chuck and
securely tighten the Chuck.