4
11. Universal Flat Bed Mounting Channel: Your winch has been optional supplied
with a flat bed mounting channel that can be mounted to most flat surfaces
such as trailers, step bumpers, truck beds, etc. The mounting channel also has
holes to accept your roller fairlead.
12. Snatch Block: If Your winch were supplied with a snatch block that, used
properly, can double the pulling power of winch, or change your pulling
direction without damaging the wire rope. We recommend you to use double
line and snatch block for pulling over 85% related line pull.
WINCH ASSEMBLY AND MOUNTING
S2500EN:
I N
OUT
R
A
D
IO
R
E
M
O
T
E
C
O
N
T
R
O
L
1. Your winch is designed with a bolt pattern that is standard in this class of winch.
Many winch mounting kits are available that utilize this bolt pattern for the most
popular vehicle and mounting channels. If you cannot find a kit locally, contact
us and we will provide you with the name of a dealer near you. If you will utilize
the mounting channel you must ensure that it is mounted on a flat surface so
that the three major sections (motor, drum and gear housing) are properly
aligned. Proper alignment of the winch will allow even distribution of the full
rated load.
2. Start by connecting the Roller Fairlead (Part# 250900) to the winch using 2
each of the Cap Bolt M10 X 35 (Part# 250002), Flat Washer (Part# 250004),