Protecting Your Adventure Lifestyle
==============================================================================================
QUALITY
●
INTEGRITY
●
INNOVATION
●
SERVICE
Warrior Products, Inc.
11100 SW Industrial Way
Tualatin, OR 97062
Phone (888) 220-6861
Fax (503) 692-0364
4.
Next, with both mounting brackets positioned and fully tightened, carefully place the main platform on
top of the mounting brackets with the curved end forward, and the corner plates and mounting plate
surfaces on the bottom side of the rack. (Note: this will be much easier with the help of a friend)
5.
Loosely install all (8)
3/8” x 1” Hex bolts, 3/8” flatwashers, and 3/8” nyloc nuts
to attach the main platform
to the mounting brackets. You may have to flex the mounting brackets inward or outward to get the holes
to align properly. Due to the taper of the FJ Cruiser roof and mounting point locations, the bolts must be
placed in the appropriate mounting holes. Please refer to Figure 3 (below) for the correct mounting bolt
placement
.
6.
Fully tighten all hardware to secure the rack in place.
If you need further assistance installing your product, please contact us by email at
Front
Rear
