tsa2mdl5sm-rev0315
sandpiperpump
.
com
Model TSA2 •
2
Performance
TSA2
SUCTION/DISCHARGE PORT SIZE
• 2.5” Sanitary Tri-Clamp Fitting
CAPACITY
• 0 to 208 gallons per minute
(0 to 787 liters per minute)
AIR DISTRIBUTION VALVE
• No-lube, no-stall design
SOLIDS-HANDLING
• Up to 2 in. (50mm)
HEADS UP TO
• 125 psi or 289 ft. of water
(8.8 Kg/cm
2
or 88 meters)
MAXIMUM OPERATING PRESSURE
• 125 psi (8.6 bar)
DISPLACEMENT/STROKE
• .43 Gallon / 1.60 liter
SHIPPING WEIGHT
• Stainless Steel 133 lbs. (60kg)
Materials
Material Profile:
Operating
Temperatures:
Max.
Min.
Nitrile:
General purpose, oil-resistant. Shows good solvent, oil,
water and hydraulic fluid resistance. Should not be used with
highly polar solvents like acetone and MEK, ozone, chlorinated
hydrocarbons and nitro hydrocarbons.
190
°
F
88
°
C
-10
°
F
-23
°
C
Maximum and Minimum Temperatures are the limits for which these materials can be operated.
Temperatures coupled with pressure affect the longevity of diaphragm pump components.
Maximum life should not be expected at the extreme limits of the temperature ranges.
Metals:
Stainless Steel:
Equal to or exceeding ASTM specification A743 CF-8M for corrosion
resistant iron chromium, iron chromium nickel and nickel based alloy castings for
general applications. Commonly referred to as 316 Stainless Steel in the pump industry.
For specific applications, always consult the Chemical Resistance Chart.
CAUTION!
Operating temperature limitations are as follows:
Ambient temperature range:
-20°C to +40°C
In addition, the ambient temperature range and the process temperature range do not exceed the
operating temperature range of the applied non-metallic parts as listed in the manuals of the pumps.
40 PSI
60 PSI
80 PSI
100 PSI
(6.8 Bar)
(2.72 Bar)
(4.08 Bar)
(5.44 Bar)
(1.36 Bar)
0
200
100
400
300
500
600
700
PSI
800
125 PSI
(8.6 Bar)
20 PSI Air Inlet Pressure
Liters per minute
U.S. Gallons per minute
CAPACITY
BAR
0
1
2
7
3
4
5
6
HEAD
AIR CONSUMPTION
SCFM (M3/hr)
MODEL HDF2 Performance Curve
Performance based on the following: elastomer fitted pump, flooded suction, water at ambient temperature.
The use of other materials and varying hydraulic conditions may result in deviations in excess of 5%.
0
20
40
60
80
100
120
140
0
20
40
60
80
100
120
140
160
180
200
220
20(34)
40(68)
60(102)
80(136)
100(170)
120(204)
10(17)
140(238)
8
9
MODEL SPECIFIC
UNIVERSAL ALL AODD
1: PUMP
SPECS
