INSTALLATION.
1) The machine should be kept in a relatively clean and dry place and a minimum
of 0.3 meters of space should be left around the equipment for easy circulation of
air.
NOTE THAT THE MACHINE DRAWS FRESH AIR FROM THE FRONT AND
FORCES IT THROUGH THE BACK
.
2) A separate mains switch should be provided for this equipment. The mains
switch should be of good quality with proper contacts. The switch should be
easily accessible to the operator.
3) Three core 7/20 gauge cables can be used for the input supply connection.
The equipment should be properly earthed and all the electrical connections
should be firm and tight. Power connection point is provided on the back cover of
the equipment.
4) The equipment must be connected to a proper earth point.
OPERATION.
1) After installation of the equipment connect the holder to the negative and job
earth cable to the positive output of the equipment. (This connection is termed as
Straight polarity. Reverse polarity can be made by interchanging the job earth
and holder cables).
2) Switch on the mains Supply.
2
