WARPP INTIG 316 AC/DC, Руководство оператора, Страница: 11 / 29

INTIG 316/501 AC/DC
- 10 -
5).Operation mode area
：
： ：
：
A. Non self-lock: when this indicator is on, the welding machine is the non self-lock status of TIG
welding.
B. Self-lock: when this indicator is on, the welding machine is the self-lock status of TIG welding.
C. Repetition: when this indicator is on, the welding machine is the repeated non self-lock status
of TIG welding.
D. MMA: when this indicator on, the machine is under MMA status
E. Operation mode selection key: this key is used to switch the operation modes of welding
machine.
6).Storage and allocation area
：
： ：
：
A. Pass key: when it is the 1
st
time to press this Pass key, voltmeter displays current pass no., and
ammeter displays current storage welding parameters. The left selection key or right selection
key can be pressed to display other parameters stored inside the pass. The storage key can be
pressed to store the current welding parameter into current pass. The allocation key can be
pressed to allocate the storage parameter inside pass as current welding parameter. The pass key
can be pressed to choose next pass. If no key is pressed, it will back out from the pass.
B. Storage key: have current welding parameter stored inside current pass.
C. Allocation key: have current parameter which is stored inside the pass allocated out to use as
current welding parameter.
8). Protection indicator area:
A
B
C
D
A B C
A B C
E