WARPP INARC-400 I, Руководство пользователя

Страница: 14 / 27

6
6. Installation
Installation :
1. Place the welding machine in the room where there is no straight sunlight, no rain,
less dust, low humidity ,and temperature range of 0° - 50°C.
2. The gradient of ground must not be more than 15°
3. Ensure no wind at the welding position, or use screen to block the wind.
4. The distance between welder and wall must be more than 300 mm.
5. Connect the 3 phase Input supply to the machine. Supply voltage must be in the
range of 400 V +_ 10% as mentioned in the Technical specification of this
manual.
6. Power supply:

The size of fuse and breaker in the table are for reference :
7. Connect the electrode holder to the +Ve terminal & earthing cable to the +Ve terminal of the
machine
8. Connect remote controller (If needed).
**************
Product type INARC 400 I INARC 630 I
Power supply 3 phase AC 400 V
Min. power capacity 18.4KVA 35KVA
Input
protection
Fuse 30A 63A
breaker 32A 63A
Min.
Cable
size
Input side 4mm
2
6mm
2
Output side 50mm
2
70mm
2
Earth lead 4mm
2
6mm
2