INARC-1000 I/ 1250 I
·１４·
Product type
INARC-1000 I
INARC-1250 I
Power Supply
3 phase AC 380V
Min. capacity
83KVA
120KVA
Input volt
protection
Fuse 90A 130A
Circuit Breaker
120A
160A
Cable size
Input volt
25mm
2
35mm
2
Output volt
70mm
2
×2 95mm
2
×2
Ground lead
16mm
2
16mm
2
Table 4: Power supply connection
Please note: The size of fuse and breaker in the table are for reference only.
2. Installation:
This series of welding machine does not need fixed installation. Ensure the location where
the machine is to be placed is even, dry, and with good ventilation.
2.1 MMA mode
(1)
Ensure firmly connection to welding cable.
(2)
Adjust every switches and potentiometers on the front panel to proper position in
line with selected mode.
(3)
Turn on the circuit breaker on the power source.
(4)
Connect input 3 phase power cable to switch box.
2.2 Air arc gouging mode
(1)
Ensure firmly connection to ground cable and air arc gouging torch.
(2)
Ensure firmly connection to gas hose and gas cylinder
(3)
Adjust every switches and potentiometers on the front panel to proper position in
line with selected mode.
(4)
Turn on the circuit breaker on the power source.
(5)
Connect input 3 phase power cable to switch box.
