©2020 Warn Industries, Inc.WARN® and the WARN logo are trademarks of Warn Industries Inc.
7
107333A0
I N S T A L L A T I O N I N S T R U C T I O N S
CARELESS INSTALLATION AND OPERATION CAN RESULT IN SERIOUS INJURY OR EQUIPMENT DAMAGE. READ AND UNDERSTAND ALL SAFETY
PRECAUTIONS AND OPERATING INSTRUCTIONS BEFORE INSTALLING AND OPERATING THIS PRODUCT.
M A I N T E N A N C E / C A R E
1. Inspect all parts on the winch, winch mount, and related hardware prior to each use. Replace all hardware that appears rusted
or deformed.
2. Inspect all nuts and bolts on the winch, winch mount,, and related hardware prior to each use. Tighten all nuts that appear to be
loose. Stripped, fractured, or bent bolts or nuts need to be replaced.
3. Check all cables prior to use. Replace cables that look worn or frayed.
4. Check all moving or rotating parts. Remove debris that may inhibit the part from moving freely.
16. Install a terminal boot to the end of the blue and yellow
cables and fasten to the corresponding terminals on
the contactor with lock washer and nut. Torque to
recommended value and seat boots over terminals.
17. Follow winch installation instructions (provided with
winch) for complete wiring instructions.
18. Torque ALL hardware to specifications provided.
Contactor
Figure 10
