©2011 Warn Industries, Inc.WARN® and the WARN logo are trademarks of Warn Industries Inc.
6
91281A0
M A I N T E N A N C E / C A R E
7. Tighten all fasteners to torque specification supplied.
8. Install bumper cover, removed in step 1. Note lower edge
of plastic may need to be trimmed to allow more access for
the plow flanges when installing plow to vehicle mount.
9. Install left and right plow bracket (A4, A5) to plow push
tube assembly. Note: the brackets are installed to the
inside of the push tube tabs. See figure 7.
1.
Inspect all parts on the plow, plow mount, and related hardware prior to each use. Replace all hardware that appears
rusted or deformed.
2.
Inspect all nuts and bolts on the plow, plow mount,, and related hardware prior to each use. Tighten all nuts that appear to
be loose. Stripped, fractured, or bent bolts or nuts need to be replaced.
3.
Check all cables prior to use. Replace cables that look worn or frayed.
4.
Check all moving or rotating parts. Remove debris that may inhibit the part from moving freely.
Figure 7
