background image

FCC and IndustryCanada(IC) Warning:

•  This device complies with Part 15 of the FCC Rules.  Operation is subject to the 

following two conditions:  (1) This device may not cause harmful interference, 
and (2) this device must accept any interference received, including interference 
that may cause undesired operation.

•  The term “IC:” before the radio certification number only signifies that industry 

Canada technical specifications were met.

•  Any changes or modifications to this product not expressly approved by WARN 

Industries could void the user’s authority to operate this product.

As you read these instructions, you will see WARNINGS, 
CAUTIONS, NOTICES and NOTES.  Each message has a specific 
purpose.  WARNINGS are safety messages that indicate 
a potentially hazardous situation, which, if not avoided 
could result in serious injury or death.  CAUTIONS are safety 
messages that indicate a potentially hazardous situation 
which, if not avoided, may result in minor or moderate 
injury.  A CAUTION may also be used to alert against unsafe 
practice.  CAUTIONS and WARNINGS identify the hazard, 
indicate how to avoid hazard, and advise of the probable 
consequence of not avoiding the hazard.  NOTICES are 
messages to avoid property damage.  NOTES are additional 
information to help you complete a procedure.  

PLEASE 

WORK SAFELY!

 GENERAL SAFETY PRECAUTIONS

W A R N I N G

W A R N I N G

W A R N I N G

FALLING OR CRUSHING HAZARD

Failure to observe these instructions could lead to 

severe injury or death.

• 

Never

 use winch to lift or move persons. 

• 

Never

 use winch as a hoist or to suspend a load. 

• 

Never

 operate winch with less than 5 wraps of 

rope around the drum. Rope could come loose 
from the drum, as the rope attachment to the 
drum is not designed to hold a load.

MOVING PARTS ENTANGLEMENT HAZARD

Failure to observe these instructions could lead to 

severe injury or death.

To avoid injury to hands or fingers.

• 

Always

 keep hands clear of  rope, hook loop, 

hook and fairlead opening during installation, 
operation, and when spooling 
in or out.

• 

Always

 use extreme caution when handling hook 

and  rope during spooling 
operations.

• 

Always

 use supplied hook strap whenever 

spooling  rope in or out, during 
installation and during operation.

• 

Always

 keep vehicle in sight during winching 

operation.

• 

Always 

wear heavy leather gloves when 

handling rope.

CHEMICAL AND FIRE HAZARD

Failure to observe these instructions could lead to 

severe injury or death.

• 

Always

 remove jewelry and wear eye 

protection.

• 

Never

 lean over battery while making 

connections.

• 

Always

 verify area is clear of fuel lines, fuel tank, 

brake lines, electrical wires, etc. when drilling.

• 

Never

 route electrical cables:

- Across any sharp edges. 

- Through or near moving parts.

- Near parts that become hot. 

• 

Always

 insulate and protect all exposed wiring 

and electrical terminals.

• 

Always

 install terminal boots as directed 

in installation instructions.

ATV Wireless Remote

INSTALLATION AND OPERATOR’S GUIDE

 

Содержание 90288







Отзывы: