I
WARN® INDUSTRIES
PAGE 6
84463A0
Figure 7
10. Tighten all fasteners.
11. Drill the front mounting location to fasten the
mounting brackets using M10 fasteners (B3, B2)
to the push tube.
Maintenance/Care
•
Inspect all metal parts on the plow, plow mount, and related hardware prior to each use. Replace all parts that
appear rusted or deformed.
•
Inspect all nuts and bolts on the plow, plow mount, and related hardware prior to each use. Tighten all nuts
and bolts that appear to be loose. Stripped, fractured, or bent bolts or nuts must be replaced.
WARNING
Failure to perform regular inspections and maintenance on the plow, plow mount, and related hardware
may result in vehicle damage and operator injury or death.
If you are having problems with your plow, please follow the steps below:
1. Reference the installation instructions for tips or notes.
2. Contact the dealer where you purchased the kit.
3. Call an authorized WARN Service Center from the warranty sheet included in the kit. Please have the fol-
lowing information available before calling: part number (listed on front of instructions), date of purchase,
and make, model, and model year of ATV.
4. Contact WARN customer service at 1-800-543-9276 or www.warn.com. Again, please have the following in-
formation available before calling: part number (listed on front of instructions), date of purchase, and make,
model, and model year of ATV.
