WARN INDUSTRIES
PAGE 2
81948A2
©2011 Warn Industries, Inc.
WARN® and the WARN logo are trademarks of Warn Industries Inc.
Notice
Equipment Damage
Always
refer to the
I
nstallation and Specification Guide, supplied in the winch kit, for all wiring schematics and specific details
on how to wire this WARN product to your vehicle.
Read installation and operating instructions thoroughly.
I. TABLE OF CONTENTS
Tools Required
page 2
Fastener Torque Specifications
page 2
Parts List
page 3
Installation
page 4
Maintenance/Care
page 5
Caution
Moving Parts Entanglement Hazard
Failure to observe these instructions could lead to minor or moderate injury.
Always
take time to fully read and understand the installation and Operations Guide included with this product.
Never
operate this product if you are under 16 years of age.
Never
operate this product when under the influence of drugs, alcohol or medications.
Read installation and operating instructions thoroughly.
II. TOOLS REQUIRED
- Rachet
- Sockets 7/16 and 1/2
III. FASTENER TORQUE SPECIFICATIONS
1/4 & M6
8 lb. ft. (10.8 N-m)
5/16 & M8
17 lb. ft. (12.5 N-m)
3/8 & M10
30 lb. ft. (40.7 N-m)
7/16
50 lb. ft. (67.8 N-m)
1/2
75 lb. ft. (101.7 N-m)
NOTE: This bumper includes mounting holes for WARN winch and trail lights, which are
sold separately.
