WARN INDUSTRIES
PAGE 4
83036A0
©2009 Warn Industries, Inc.
WARN® and the WARN logo are trademarks of Warn Industries Inc.
Figure 2
Figure 3
Figure 4
1. Remove the four screws that secure the skid
plate to the front bumper.
2. Use the 5/16 x 1” capscrews to secure the plow
mount inner mounting tabs to the vehicle, as
shown in Figure 3. Loosely secure the bolts
using 5/16 flat washers and lock nuts. Refer to
Figure 1.
3. Use two 5/16 u-bolts to secure plow mount to
vehicle frame tubes, as shown in Figure 4.
4. Torque all hardware to 15ft.lbs (20 N-m).
5. Re-install the factory skid plate with original
fasteners.
III. INSTALLATION
