Your safety, and the safety of others, is very important. To help you make informed decisions about safety, we have provided
installation and operating instructions and other information on labels and in this guide. This information alerts you to potential
hazards that could hurt you or others. It is not possible to warn you about all potential hazards associated with this product, you
must use your own good judgment.
CARELESS INSTALLATION AND OPERATION CAN RESULT IN SERIOUS INJURY OR EQUIPMENT DAMAGE.
READ AND UNDERSTAND ALL SAFETY PRECAUTIONS AND OPERATING INSTRUCTIONS BEFORE
INSTALLING AND OPERATING THIS PRODUCT.
This guide identifies potential hazards and has important safety messages that help you and others avoid personal injury or
death.
WARNING
and
CAUTION
are signal words that identify the level of hazard. These signal words mean:
WARNING signals a hazard that could cause serious injury or death, if you do not follow recommendations.
CAUTION signals a hazard that may cause minor to moderate injury, if you do not follow recommendations.
This guide uses
NOTICE
to call attention to important mechanical information, and
Note:
to emphasize general information
worthy of special attention.
WARN INDUSTRIES
PAGE 1
75732 A0
Caution
Moving Parts Entanglement Hazard
Failure to observe these instructions could lead to minor or moderate injury.
Always
take time to fully read and understand the installation and Operations Guide included
with this product.
Read installation and operating instructions thoroughly.
WARNING
INJURY HAZARD
Failure to observe these instructions could lead to severe injury or death.
Always
use extreme caution when drilling on any vehicle. Make sure that all fuel lines, brake lines, electrical wires, and other objects are
not punctured or damaged when/if drilling on the vehicle. Thoroughly inspect the area to be drilled (on both sides of material) prior to
drilling, and relocate any objects that may be damaged. Failure to inspect the area to be drilled may result in vehicle damage, electrical
shock, fire or personal injury.
Always
wear safety glasses when installing this kit. A drilling operation will cause flying metal chips. Flying chips can cause eye injury.
Always
use extreme caution when cutting and trimming during fitting.
Always
remove jewelry and wear eye protection.
Always
use appropriate and adequate care in lifting components into place.
Always
insure components will remain secure during installation and operation.
Always
tighten all nuts and bolts securely, per the installation instructions..
Always
replace all worn or damaged parts before operating.
Never
operate this WARN product with damaged or missing parts.
INSTALLATION INSTRUCTIONS
ROCK SLIDERS
Part Number: 74580
Application: 2007 JEEP JK WRANGLER 2 DOOR
