WARN INDUSTRIES
PAGE 1
60178 C1
INSTALLATION INSTRUCTIONS
ATV WINCH ACCESSORY
Winch Mount Kit:
WARN PN 60174
Application:
HONDA 450 ES AND S, 400 FOREMAN
(Will fit 3.0ci)
Your safety, and the safety of others, is very important. To help you make informed decisions about safety, we
have provided installation and operating instructions and other information on labels and in this guide. This
information alerts you to potential hazards that could hurt you or others. It is not possible to warn you about all
potential hazards associated with this product, you must use your own good judgment.
CARELESS INSTALLATION AND OPERATION CAN RESULT IN SERIOUS INJURY OR EQUIPMENT DAMAGE. READ
AND UNDERSTAND ALL SAFETY PRECAUTIONS AND OPERATING INSTRUCTIONS BEFORE INSTALLING AND
OPERATING THIS PRODUCT.
This guide identifies potential hazards and has important safety messages that help you and others avoid personal
injury or death
. WARNING
and
CAUTION
are signal words that identify the level of hazard. These signal words
mean:
WARNING signals a hazard that could cause serious injury or death, if you do not follow recommenda-
tions. CAUTION signals a hazard that may cause minor to moderate injury, if you do not follow recommen-
dations.
This guide uses
NOTICE
to call attention to important mechanical information, and
Note
: to emphasize gen-
eral information worthy of special attention.
SEVERE INJURY OR DEATH MAY RESULT IF YOU IGNORE ANY OF THE FOLLOWING:
· Read the Winch Operator Manual, the ATV Operator Manual, and all warning labels before operating or
using your ATV winch.
· Always stay clear of moving parts and cables. Keep others away when operating the winch.
· Always inspect the winch mechanism, fasteners, cables, and adjustments before operating. Replace all worn
or damaged parts before operating.
· Always deactivate the winch before leaving the ATV unattended.
READ THE WINCH OPERATOR MANUAL BEFORE FREESPOOLING THE WINCH OR ATTACHING
THE HOOK. BE CAREFUL WHEN CUTTING THE RUBBERBAND, THE CABLE IS PRESTRESSED
AGAINST THE DRUM AND MAY UNWIND QUICKLY AND WITHOUT NOTICE POSSIBLY HARMING
THE OPERATOR.
THE WINCH, WINCH PLATE, AND FAIRLEAD ASSEMBLY IS HEAVY. USE PROPER LIFTING TECH-
NIQUE WHEN LIFTING THE ASSEMBLY. KEEP TOES AND OTHER EXTREMITIES FROM BEING
UNDERNEATH THE ASSEMBLY IN CASE THE ASSEMBLY IS ACCIDENTLY DROPPED. USE AN-
OTHER PERSONS ASSISTANCE IF NEEDED.
FAILURE TO SECURELY TIGHTEN ALL BOLTS ON THE WINCH PLATE, WINCH, AND FAIRLEAD
CAN RESULT IN PRODUCT FAILURE WHICH MAY RESULT IN VEHICLE DAMAGE AND OPERATOR
INJURY OR DEATH. DOUBLE CHECK THAT ALL BOLTS ARE SECURELY TIGHTENED PRIOR TO
USE.
PERFORM REGULAR INSPECTIONS ON THE WINCH, WINCH MOUNT, AND RELATED HARDWARE.
NEVER OPERATE THE WINCH WITH DAMAGED OR MISSING PARTS. FAILURE TO FOLLOW THIS
WARNING MAY CAUSE VEHICLE DAMAGE AND OPERATOR INJURY OR DEATH.
WARNING
