WARN INDUSTRIES
PAGE 4
39527 Rev A1
FIGURE #4: FRAME MOUNT INSTALLATION
CAUTION
When using a winch with this plow, read your winch operator manual before
proceeding with this installation. A roller fairlead must be used for lifting and
lowering the plow. Cable damage will occur if a roller fairlead is not used.
2. Plow Installation:
Slide the plow into position with the tubes under the. Lift the end of the tube assembly into position so the
holes in the Tube Wings line up with the 3/8” holes in the frame bracket. A Phillips head screwdriver may
be used to align the holes. Insert both 3/8” pins and hook the retaining clips on the ends of the pins to secure
the plow to the ATV. If it is determined that the Plow is not straight with respect with the ATV, then the
nuts on the Frame Mounting Bracket should be loosened and the plow adjustments made to make it straight.
Then retighten and torque the nuts on the Frame Mounting Bracket to approximately 15ft.-lb (20 N-m).
FRONT OF BIKE
