©2018 Warn Industries, Inc. WARN® and the WARN logo are trademarks of Warn Industries Inc.
6
102947A0
8. Reinstall the bumper using hex head bolts (B6), lock washers
(B7) and flat washers (B8) in front mounting hole and the
lower factory hardware in rear mouting hole.
9. Attach the fairlead to the front of the bumper using the
10mm socket head bolts and lock nuts provided in your
winch kit.
NOTE: The bolt should pass through the fairlead,
bumper and mounting plate before installing the nut.
10. Reinstall your grille.
11. Complete the winch wiring instructions per your winch
installation instructions.
12. Tighten all hardware.
Installation is now complete.
Figure 7
Figure 8
M A I N T E N A N C E / C A R E
1. Inspect all parts on the winch, winch mount, and related hardware prior to each use. Replace all hardware that appears rusted or
deformed.
2. Inspect all nuts and bolts on the winch, winch mount and related hardware prior to each use. Tighten all nuts that appear to be
loose. Stripped, fractured, or bent bolts or nuts need to be replaced.
3. Check all cables prior to use. Replace cables that look worn or frayed.
4. Check all moving or rotating parts. Remove debris that may inhibit the part from moving freely.
Spacer
*AXON Winch Only
Factory Hardware
B8, B7 & B6
Hardware
